What details should be noted when installing stage lights？

When installing stage lights, the following details should be noted to ensure the installation quality and performance effect:

First, preparations before installation

Check the integrity of the accessories

Make sure all accessories are complete, including the lamp body, bulb, lampshade, installation bracket, connecting wire, fixing screws, etc.

Check whether the accessories are intact. If there is any damage or defect, they should be replaced in time.

Read the installation manual

Read the installation manual of the stage lights carefully to understand the installation steps, precautions and special requirements.

Make sure to install in accordance with the requirements of the manual to avoid problems caused by improper operation.

Determine the installation location

Based on the stage layout and performance requirements, determine the installation positions of the stage lights.

Ensure that the installation position is stable, safe, and convenient for operation and maintenance.

Second, the details during the installation process

Anti-static treatment

Operators must wear grounded anti-static wrists, anti-static shoes and anti-static clothing.

All equipment and instruments that come into contact with leds must be well grounded, especially the soldering irons and tin furnaces used for soldering must be well grounded.

Anti-static wrists must be tested every day. Those that fail the test must be replaced.

Pin forming and welding

The formation of the bracket must be carried out with fixtures or by professionals to ensure that the pins and spacings are consistent with those on the circuit board.

The formation of the support must be completed before welding, and it must be 2 millimeters away from the colloid before bending the support to avoid colloid rupture or damage to the internal structure.

When soldering with a soldering iron, the temperature at the tip of the soldering iron should not exceed 300℃, the soldering time should not exceed 3 seconds, and the soldering position should be at least 3 millimeters away from the adhesive.

During immersion welding, the maximum temperature should be 260℃, the immersion welding time should not exceed 5 seconds, and the immersion welding position should be at least 2 millimeters away from the colloid.

Fixation and connection

Make sure the stage lights are installed firmly. Use appropriate fixing screws and nuts to prevent loosening or dropping.

The connecting wires should be neat and firm to avoid cross-interference or pulling and breaking.

For stage lights that need to be hoisted, an appropriate hoisting point should be selected to ensure that the load-bearing capacity meets the requirements. Use safety ropes or other fixing devices to firmly fix the lights at the hoisting point.

Debugging and Testing

After the installation is completed, conduct debugging and testing to ensure that the stage lights are working properly and that the effects such as brightness, color and pattern meet the requirements.

Check the control functions of the stage lights, such as dimming, color change, pattern transformation, etc., to ensure there are no errors.

Third, precautions after installation

Safety inspection

Regularly check the installation of stage lights to ensure there is no looseness or damage.

Check the electrical connections of the stage lights to ensure there is no exposure or aging.

Maintenance and upkeep

Regularly clean the surface and interior of the stage lights to keep them clean and bright.

Regularly inspect the vulnerable parts such as the bulbs and reflector bowls of the stage lights and replace them in a timely manner.

Precautions for Use

When using stage lights, avoid suddenly turning on the lights to prevent damage to the bulbs or circuits.

Avoid shaking the lamp vigorously when the bulb is lit to prevent the tungsten filament of the bulb from breaking or falling off.

Comply with safety regulations to ensure the safety of personnel and equipment.

Fourth, other precautions

Consider environmental factors

Select the appropriate model and power of stage lights based on the stage environment.

Avoid installing stage lights in damp, high-temperature or flammable and explosive environments.

Coordination and matching

Consider the harmonious combination of stage lights with other equipment, such as sound systems and curtains.

Ensure that the installation position and Angle of the stage lights can fully exert their lighting effect.

Professional installation

For complex or large-scale stage lighting installation projects, it is recommended to hire a professional installation team for installation and commissioning.

By paying attention to the above details, the installation quality of stage lights and the performance effect can be ensured, bringing a better visual experience to the audience.