The fixing methods for different material stage surfaces when installing stage lights

When installing stage lights, different fixation methods should be adopted for stage surfaces made of different materials to ensure the stability and safety of the stage lights. The following are some common stage surface materials and their corresponding fixation methods:

First, the wooden stage surface

Fix with screws

For wooden stages, screws can be used to directly fix the base or bracket of the stage lights onto the stage. First, find a suitable position on the stage surface, drill holes with an electric drill, and then screw the screws into the holes to fix the stage lights on the stage.

Use expansion screws

If the stage surface is thin or requires stronger fixation, expansion screws can be used. After the expansion screw is screwed into the hole, its tail will expand, thus firmly fixing it on the stage.

Second, the concrete stage surface

Use embedded parts

For concrete stages, metal parts (such as embedded bolts, embedded plates, etc.) can be pre-embedded during the construction of the stage, and then the stage lights can be fixed to the embedded parts by screws or welding when installing them.

Use chemical anchor bolts

If the stage has been completed, chemical anchor bolts can be used for fixation. Chemical anchor bolts are firmly bonded to the concrete through specially formulated chemical adhesives, and then the stage lights are fixed on the anchor bolts.

Third, the surface of the metal stage

Use welding

For metal stages, if the base or bracket of the stage light is made of the same or similar material as the stage, the stage light can be directly welded onto the stage by welding.

Use screws and washers

If the base or bracket of the stage light is made of a different material from the stage, or to avoid damage to the stage caused by welding, screws and washers can be used for fixation. First, drill holes on the surface of the stage, then place gaskets, screw screws into the holes, and fix the stage lights on the stage.

Fourth, other material stage surfaces (such as glass, stone, etc.)

Use special fixtures

For stage surfaces such as glass and stone that are fragile or difficult to drill, special fixtures can be used for fixation. The design of the fixture should ensure that it does not cause damage to the stage surface and can provide sufficient fixing force.

Consult professionals

Before installing stage lights, it is best to consult a professional to understand the material and characteristics of the stage surface, as well as the most suitable fixation method.

Fifth, General Precautions

Ensure stability

No matter which fixation method is adopted, it is necessary to ensure that the stage lights can be firmly fixed on the stage to avoid loosening or collapse during use.

Avoid damaging the stage surface

During the installation process, every effort should be made to avoid causing damage to the stage surface. For example, when drilling, the appropriate drill bit should be selected to avoid overheating or damaging the stage surface of the drill bit.

Consider aesthetics

When choosing a fixation method, aesthetics should also be taken into consideration. Try to hide the fasteners as much as possible or choose fasteners with a color similar to that of the stage surface to minimize the impact on the overall aesthetics of the stage.

Follow safety regulations

During the installation process, relevant safety regulations must be followed to ensure the safety of the operators. For example, when using an electric drill, protective glasses should be worn to avoid injury caused by flying fragments.

In summary, when installing stage lights, the fixation methods for different material stage surfaces need to be selected based on the actual situation. During the installation process, it is necessary to ensure stability, avoid damaging the stage surface, consider aesthetics, and follow relevant safety regulations.